Skip navigation

Duo Security is now a part of Cisco

About Cisco

Documentation

VMware Horizon View

Last Updated: May 31st, 2018

Duo integrates with VMware Horizon View 5.1 and newer to add two-factor authentication to VMware View client login.

Overview

To integrate Duo with your VMWare View Server, you will need to install a local proxy service on a machine within your network. This Duo proxy server also acts as a RADIUS server — there's usually no need to deploy a separate additional RADIUS server to use Duo.

Once configured, Duo sends your users an automatic authentication request via Duo Push notification to a mobile device or phone call after successful primary login.

This configuration doesn't support inline self-service enrollment. You'll need to create your users in Duo ahead of time using one of our other enrollment methods, like directory sync or CSV import. Read the enrollment documentation to learn more.

Connectivity Requirements

This application communicates with Duo's service on TCP port 443. Firewall configurations that restrict outbound access to Duo's service with rules using destination IP addresses or IP address ranges aren't recommended, since these may change over time to maintain our service's high availability. If your organization requires IP-based rules, please review this Duo KB article.

Why an alternate configuration?

The alternate configuration will automatically send a push authentication to Duo Mobile or an automatic phone call to authenticate. This configuration does not support passcode entry. If you would like to use passcode authentication with VMware View, please see our primary VMware View Instructions.

First Steps

You should already have a working primary authentication configuration for your VMware View Server users before you begin to deploy Duo.

To integrate Duo with your VMware View Server, you will need to install a local proxy service on a machine within your network. This Duo proxy server also acts as a RADIUS server — there's usually no need to deploy a separate RADIUS server to use Duo.

Before proceeding, you should locate (or set up) a system on which you will install the Duo Authentication Proxy. The proxy supports Windows and Linux systems (in particular, we recommend Windows Server 2012 R2 or later, Red Hat Enterprise Linux 7 or later, CentOS 7 or later, or Debian 7 or later).

Then you'll need to:

  1. Sign up for a Duo account.
  2. Log in to the Duo Admin Panel and navigate to Applications.
  3. Click Protect an Application and locate VMware View in the applications list. Click Protect this Application to get your integration key, secret key, and API hostname. See Getting Started for help.
Treat your secret key like a password

The security of your Duo application is tied to the security of your secret key (skey). Secure it as you would any sensitive credential. Don't share it with unauthorized individuals or email it to anyone under any circumstances!

Install the Duo Authentication Proxy

The Duo Authentication Proxy can be installed on a physical or virtual host. We recommend a system with at least 1 CPU, 200 MB disk space, and 4 GB RAM (although 1 GB RAM is usually sufficient).

  1. Download the most recent Authentication Proxy for Windows from https://dl.duosecurity.com/duoauthproxy-latest.exe. Note that the actual filename will reflect the version e.g. duoauthproxy-3.1.0.exe. View checksums for Duo downloads here.
  2. Launch the Authentication Proxy installer on the target Windows server as a user with administrator rights and follow the on-screen prompts.
  1. Ensure that Perl, Python 2.6 or 2.7 (including development headers and libraries), and a compiler toolchain are installed. On most recent RPM-based distributions — like Fedora, RedHat Enterprise, and CentOS — you can install these by running (as root):

    $ yum install gcc make python-devel libffi-devel perl zlib-devel

    On Debian-derived systems, install these dependencies by running (as root):

    $ apt-get install build-essential python-dev libffi-dev perl zlib1g-dev
  2. Download the most recent Authentication Proxy for Unix from https://dl.duosecurity.com/duoauthproxy-latest-src.tgz. Depending on your download method, the actual filename may reflect the version e.g. duoauthproxy-3.1.0-src.tgz. View checksums for Duo downloads here.

  3. Extract the Authentication Proxy files and build it as follows:

    $ tar xzf duoauthproxy-latest-src.tgz
    $ cd duoauthproxy-version-src
    $ make
  4. Install the authentication proxy (as root):

    $ cd duoauthproxy-build
    $ ./install

    Follow the prompts to complete the installation. The installer creates a user to run the proxy service and a group to own the log directory and files. You can accept the default user and group names or enter your own.

If you ever need to uninstall the proxy, run /opt/duoauthproxy/uninstall.

Configure the Proxy

After the installation completes, you will need to configure the proxy.

The Duo Authentication Proxy configuration file is named authproxy.cfg, and is located in the conf subdirectory of the proxy installation. With default installation paths, the proxy configuration file will be located at:

Platform Default Configuration Path
Windows (64-bit) C:\Program Files (x86)\Duo Security Authentication Proxy\conf\authproxy.cfg
Windows (32-bit) C:\Program Files\Duo Security Authentication Proxy\conf\authproxy.cfg
Linux /opt/duoauthproxy/conf/authproxy.cfg

The configuration file is formatted as a simple INI file. Section headings appear as:

[section]

Individual properties beneath a section appear as:

name=value

The Authentication Proxy may include an existing authproxy.cfg with some example content. For the purposes of these instructions, however, you should delete the existing content and start with a blank text file. We recommend using WordPad or another text editor instead of Notepad when editing the config file on Windows.

Configure the Proxy for Your Primary Authenticator

In this step, you'll set up the Proxy's primary authenticator — the system which will validate users' existing passwords. In most cases, this means configuring the Proxy to communicate with Active Directory or RADIUS.

Active Directory

To use Active Directory as your primary authenticator, add an [ad_client] section to the top of your config file. Add the following properties to the section:

Required

host The hostname or IP address of your domain controller.
service_account_username The username of a domain member account that has permission to bind to your Active Directory and perform searches. We recommend creating a service account that has read-only access.
service_account_password The password corresponding to service_account_username. If you're on Windows and would like to encrypt this password, see Encrypting Passwords in the full Authentication Proxy documentation.
search_dn

The LDAP distinguished name (DN) of an Active Directory container or organizational unit (OU) containing all of the users you wish to permit to log in. For example:

search_dn=DC=example,DC=com

Optional

host_2 The hostname or IP address of a secondary/fallback domain controller. You can add additional domain controllers as host_3, host_4, etc.
security_group_dn

To further restrict access, specify the LDAP distinguished name (DN) of a security group that contains the users who should be able to log in. Other users will not pass primary authentication. For example:

security_group_dn=CN=DuoVPNUsers,OU=Groups,DC=example,DC=com

For example:

[ad_client]
host=1.2.3.4
host_2=1.2.3.5
service_account_username=duoservice
service_account_password=password1
search_dn=DC=example,DC=com
security_group_dn=CN=DuoVPNUsers,OU=Groups,DC=example,DC=com

For advanced Active Directory configuration, see the full Authentication Proxy documentation.

RADIUS

To use RADIUS as your primary authenticator, add a [radius_client] section to the top of your config file. Then add the following properties to the section:

Required

host The IP address of your RADIUS server. You can add backup servers with host_2, host_3, etc.
secret A secret to be shared between the Authentication Proxy and your existing RADIUS server. If you're on Windows and would like to encrypt this secret, see Encrypting Passwords in the full Authentication Proxy documentation.

Optional

port The authentication port on your RADIUS server. By default, the proxy will attempt to contact your RADIUS server on port 1812. Use port_2, port_3, etc. to specify ports for the backup servers.
pass_through_all If this option is set to "true", all RADIUS attributes set by the primary authentication server will be copied into RADIUS responses sent by the proxy. Default: "false"

For example:

[radius_client]
host=1.2.3.4
secret=radiusclientsecret

In addition, make sure that the RADIUS server is configured to accept authentication requests from the Authentication Proxy.

For advanced RADIUS configuration, see the full Authentication Proxy documentation.

Configure the Proxy for Your VMware View Server

Next, we'll set up the Authentication Proxy to work with your VMware View Server. Create a [radius_server_auto] section with the following properties:

Required

ikey Your integration key.
skey Your secret key.
api_host Your API hostname (e.g. "api-XXXXXXXX.duosecurity.com").
radius_ip_1 The IP address of your VMware View Server.
radius_secret_1 A secret to be shared between the proxy and your VMware View Server. If you're on Windows and would like to encrypt this secret, see Encrypting Passwords in the full Authentication Proxy documentation.
client

The mechanism that the Authentication Proxy should use to perform primary authentication. This should correspond with a "client" section elsewhere in the config file.

"ad_client" Use Active Directory for primary authentication. Make sure you have an [ad_client] section configured.
"radius_client" Use RADIUS for primary authentication. Make sure you have a [radius_client] section configured.
"duo_only_client" Do not perform primary authentication. Make sure you have a [duo_only_client] section configured.

This parameter is optional if you only have one "client" section. If you have multiple, each "server" section should specify which "client" to use.

Optional

port The port on which to listen for incoming RADIUS Access Requests. Default: 1812.
failmode

Either "safe" or "secure":

"safe" In the event that Duo's service cannot be contacted, users' authentication attempts will be permitted if primary authentication succeeds. This is the default.
"secure" In the event that Duo's service cannot be contacted, all users' authentication attempts will be rejected.
radius_ip_2 The IP address of your second VMware View Server, if you have one. You can specify additional devices as as radius_ip_3, radius_ip_4, etc.
radius_secret_2 The secrets shared with your second VMware View Server, if using one. You can specify secrets for additional devices as radius_secret_3, radius_secret_4, etc. If you're on Windows and would like to encrypt this secret, see Encrypting Passwords in the full Authentication Proxy documentation.

A completed config file that uses Active Directory should look something like:

[ad_client]
host=1.2.3.4
service_account_username=duoservice
service_account_password=password1
search_dn=cn=Users,dc=example,dc=com
 
[radius_server_auto]
ikey=DIXXXXXXXXXXXXXXXXXX
skey=XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
api_host=api-XXXXXXXX.duosecurity.com
radius_ip_1=5.6.7.8
radius_secret_1=radiussecret1
client=ad_client
port=1812
failmode=safe

Make sure to save your configuration file when done.

Note

View video guides for proxy deployment at the Authentication Proxy Overview or see the Authentication Proxy Reference Guide for additional configuration options.

Start the Proxy

Open an Administrator command prompt and run:

net start DuoAuthProxy

Alternatively, open the Windows Services console (services.msc), locate "Duo Security Authentication Proxy Service" in the list of services, and click the Start Service button.

If the service starts successfully, Authentication Proxy service output is written to the authproxy.log file, which can be found in the log subdirectory.

If you see an error saying that the "service could not be started", open the Application Event Viewer and look for an Error from the source "DuoAuthProxy". The traceback may include a "ConfigError" that can help you find the source of the issue.

Stop and restart the Authentication Proxy service by either clicking the Restart Service button in the Windows Services console or issuing these commands from an Administrator command prompt:

net stop DuoAuthProxy & net start DuoAuthProxy

Open a root shell and run:

# /opt/duoauthproxy/bin/authproxyctl start

To ensure the proxy started successfully, run:

# /opt/duoauthproxy/bin/authproxyctl status

Authentication Proxy service output is written to the authproxy.log file, which can be found in the log subdirectory.

To stop and restart the Authentication Proxy, open a root shell and run:

# /opt/duoauthproxy/bin/authproxyctl restart

If you modify your authproxy.cfg configuration after initial setup, you'll need to stop and restart the Duo Authentication Proxy service or process for your change to take effect.

Configure VMware View

Configure Your VMware View Connection Server

  1. Log in to the VMware View administrative interface.
  2. Navigate to View Configuration → Servers → Connection Servers in the administrative interface.
  3. Select the connection server that you want to protect and click Edit.
  4. Click on the Authentication tab.
  5. Under "Advanced Authentication, select RADIUS in the "2-factor authentication" drop-down list. Enable RADIUS Authentication
  6. Enable both Enforce 2-factor and Windows user name matching and Use the same user name and password for RADIUS and Windows authentication.
  7. Select Create New Authenticator in the Authenticator drop-down list: Enable Options and Add New Authenticator
  8. Add a new RADIUS authenticator with the following information:
    Label A name for this authenticator. This name is shows in client connection during authentication.
    Description An optional description of this authenticator.
    Hostname/Address The IP address or host name of your Duo Authentication Proxy server.
    Authentication port The RADIUS port specified in your authentication proxy configuration (default is 1812).
    Accounting port 0
    Authentication type Select PAP.
    Shared secret The RADIUS secret shared with your Duo Authentication Proxy.
    Server Timeout 60
    Enter Duo RADIUS Authenticator Information
  9. Click Next VMware View allows you to configure an optional secondary Authentication Server. Click Finish to complete creating the Duo RADIUS authenticator.
  10. Ensure both user name options are enabled and that the newly-created Duo RADIUS authenticator is selected, and then click OK. Complete Duo RADIUS Configuration

Test Your Setup

  1. Start Your VMware View Client and enter your primary credentials (make sure you've already enrolled in Duo).

    Horizon View Client Primary Authentication

  2. When you enter your username and password, you will receive an automatic push or phone callback.

Troubleshooting

Need some help? Take a look at the VMWare Horizon View Frequently Asked Questions (FAQ) page or try searching our VMWare Horizon View Knowledge Base articles or Community discussions. For further assistance, contact Support.

Network Diagram

  1. Primary authentication initiated to VMWare View
  2. VMware View sends RADIUS authentication request to Duo Security’s authentication proxy
  3. Primary credential verification using Active Directory
  4. Duo authentication proxy connection established to Duo Security over TCP port 443
  5. Secondary authentication via Duo Security’s service
  6. Duo authentication proxy receives authentication response and sends to VMWare View
  7. VMWare View performs primary authentication to Active Directory
  8. VMware View access granted

Ready to Get Started?

Sign Up Free